- Monday to Saturday 7:00 am - 5:30 pm
October 23, 2026
You step into the shower expecting hot water, and all you get is a cold blast. You head to the water heater, relight the pilot, and it works. Then a few hours later, the pilot is out again.
A pilot light that keeps going out is one of the most common gas water heater problems. It’s also a safety issue, because it involves a gas appliance that isn’t working the way it was designed to. Some causes are minor. Others need a licensed professional right away.
At Cordova’s Plumbing LLC, we repair and replace gas water heaters for homeowners and businesses throughout Richmond, VA and the surrounding area. Here is what causes a pilot light to go out, what you can safely check, and when to put the tools down and call a pro.
Understanding the system makes it easier to see why it fails.
When a pilot won’t stay lit, one of these parts is usually failing, or something is disrupting the flame.
This is the most common culprit. Thermocouples wear out over time, and a weak one can’t generate enough current to keep the gas valve open, even when the flame looks normal. If the pilot lights while you hold the control knob down but goes out as soon as you release it, a failing thermocouple is the likely cause.
Dust, soot, and debris can partially block the tiny opening that feeds gas to the pilot. The flame becomes weak, small, or unstable, and it can’t keep the thermocouple hot enough. A healthy pilot flame should be steady and mostly blue.
A strong draft from a nearby door, window, or HVAC vent can blow the pilot out. Blocked or improper venting can also cause problems. If combustion gases can’t leave through the flue properly, the flame can be disturbed or snuffed out. Poor venting is also a carbon monoxide risk, which is why it should never be ignored.
The gas control valve regulates the flow of gas to both the pilot and the main burner. If it is failing, it may shut off gas unexpectedly or deliver an inconsistent supply. This is not a DIY repair.
If the pilot is weak or goes out when other gas appliances run, the problem may be the gas supply to your home. A restriction in the gas line or a regulator issue can starve the pilot of fuel.
Years of mineral sediment can settle at the bottom of the tank. Excess buildup causes the burner to run longer and hotter, and it can contribute to overheating, which may trip the safety systems that shut the unit down.
Most gas water heaters last about 8 to 12 years. As the unit ages, components wear out together, and repeated pilot problems can be a sign the whole heater is nearing the end of its service life.
Some basic observations are reasonable for a homeowner and can help a plumber diagnose the problem faster. These are checks only, not repairs.
If you choose to relight the pilot, follow the exact instructions on the unit’s label and only if you smell no gas. If you smell gas at any point, do not attempt to relight it.
Pilot light problems involve gas, so the line between a simple fix and a safety risk is thin. Call a professional right away if:
Gas work in Virginia must be performed by licensed professionals, and a repair done incorrectly can create fire, explosion, or carbon monoxide hazards.
When our team inspects a water heater with a pilot problem, we start with the simplest, most cost-effective fix and work from there.
We give you an honest, side-by-side recommendation so you can choose the option that fits your home and budget.
A pilot light that won’t stay lit is your water heater telling you something is wrong. Often the fix is simple, like a worn thermocouple. But because gas and combustion are involved, it is not worth gambling on guesswork. A quick professional inspection protects your family, restores your hot water, and can extend the life of your water heater.
If your pilot keeps going out, the licensed team at Cordova’s Plumbing LLC is ready to diagnose the problem and get your hot water running safely again.
Dealing with a water heater that won’t stay lit in Richmond, VA? Contact Cordova’s Plumbing LLC today. We’re licensed, insured, bilingual, and available 24/7 for emergencies throughout Richmond and the surrounding 100-mile area.
📞 Call us at (804) 974-5484 or contact us online to schedule your service.
Our team is committed to excellence, honesty, and long-lasting results—providing peace of mind for homeowners and businesses alike.
Our licensed and insured team is dedicated to delivering professional results and 24/7 emergency support when you need it most.
When you choose us, you’re not just hiring a contractor. You’re gaining a trusted partner with over 10 years of experience, licensed and insured service, and a commitment to quality and customer satisfaction.