- Monday to Saturday 7:00 am - 5:30 pm
November 19, 2026
You step into the shower expecting a strong stream, and you get a weak trickle. The kitchen faucet takes forever to fill a pot. The washing machine seems to run for hours. Low water pressure is one of the most common plumbing complaints homeowners have, and it’s also one of the most frustrating, because the cause isn’t always obvious.
Sometimes the fix is as simple as cleaning a clogged faucet screen. Other times it points to a hidden leak, corroded pipes, or a failing valve that needs a licensed plumber. At Cordova’s Plumbing LLC, we diagnose and repair pressure problems for homeowners throughout Richmond, VA and the surrounding area. Here is how to narrow down the cause and what to do about it.
Where and when the pressure drops is the biggest clue to what’s causing it.
A few minutes of observation can save a plumber time and save you money.
Mineral deposits and sediment collect in the small screens and openings of faucet aerators and showerheads. If only one or two fixtures are weak, this is the first thing to check.
The main shutoff valve, the meter valve, or a fixture’s supply valve may not be fully open. This happens after plumbing work, repairs, or when a valve has been bumped or partially turned.
Many homes have a pressure-reducing valve near the main entry point that keeps incoming pressure at a safe level. When it fails or drifts out of adjustment, pressure throughout the house can drop, or swing too high.
Older homes, especially those with galvanized steel pipes, can develop rust and mineral buildup that narrows the inside of the pipe. Water has less room to flow, so pressure gradually fades. This is a common issue in older housing stock throughout the Richmond area.
Water escaping from a pipe before it reaches your fixtures reduces pressure at the tap. A sudden or unexplained drop, especially paired with a higher water bill, deserves a closer look.
If low pressure shows up only with hot water, sediment buildup in the tank or in the heater’s connections can restrict flow.
A water service line that is too small for the home’s demand, crushed, kinked, or deteriorating can limit pressure. This is more common after renovations that added fixtures to an existing system.
A clogged filter cartridge, a malfunctioning softener, or a partially closed bypass valve can restrict flow throughout the home.
Sometimes the problem is not in your home at all. Water main work, repairs, or high demand in your area can temporarily lower pressure. If your neighbors are noticing the same thing, it’s worth checking with the water utility.
These steps are low-risk and can help you narrow down the cause.
If these checks don’t solve the problem, it’s time for a professional diagnosis.
The right solution depends on the cause. Common repairs include:
A good plumber starts with the simplest, least expensive explanation and works toward larger repairs only when the evidence calls for it.
Call a professional if:
Pressure problems can mask leaks, and leaks can cause mold, structural damage, and high water bills. Getting the cause diagnosed early often costs far less than repairing the damage later.
It may seem odd, but pressure that is too high is also a risk. Excessive pressure puts stress on pipes, fittings, water heaters, and appliances, and can shorten their lives. If a pressure regulator is failing, you may see pressure swing between too low and too high. That’s another reason a gauge reading and professional evaluation are so valuable.
Low water pressure is annoying, but it’s also useful information. It tells you something in your plumbing system has changed, whether that’s a clogged fixture, a failing valve, an aging pipe, or a hidden leak. Many causes are simple and affordable to fix, and the sooner you find the source, the better.
If you’ve done the basic checks and the pressure is still disappointing, the licensed team at Cordova’s Plumbing LLC can track down the cause and recommend a fix that makes sense for your home and budget.
Struggling with weak water pressure in Richmond, VA? Contact Cordova’s Plumbing LLC for a free estimate. We’re licensed, insured, bilingual, and available 24/7 throughout Richmond and the surrounding 100-mile area.
📞 Call us at (804) 974-5484 or contact us online to schedule your visit.
Our team is committed to excellence, honesty, and long-lasting results—providing peace of mind for homeowners and businesses alike.
Our licensed and insured team is dedicated to delivering professional results and 24/7 emergency support when you need it most.
When you choose us, you’re not just hiring a contractor. You’re gaining a trusted partner with over 10 years of experience, licensed and insured service, and a commitment to quality and customer satisfaction.