Richmond, VA

100 Miles Of Coverage

Sundays

Only for emergencies

24/7

Emergency Service

Gas Plumbing

Water Heater Pilot Light Won’t Stay Lit? Causes and When to Call a Pro

Gas Plumbing 17

You step into the shower expecting hot water, and all you get is a cold blast. You head to the water heater, relight the pilot, and it works. Then a few hours later, the pilot is out again.

A pilot light that keeps going out is one of the most common gas water heater problems. It’s also a safety issue, because it involves a gas appliance that isn’t working the way it was designed to. Some causes are minor. Others need a licensed professional right away.

At Cordova’s Plumbing LLC, we repair and replace gas water heaters for homeowners and businesses throughout Richmond, VA and the surrounding area. Here is what causes a pilot light to go out, what you can safely check, and when to put the tools down and call a pro.

How a Water Heater Pilot Light Works

Understanding the system makes it easier to see why it fails.

  • The pilot light is a small, continuous flame that ignites the main burner whenever your water heater needs to heat the water in the tank
  • A safety device called a thermocouple sits in the pilot flame and generates a tiny electrical current as long as it stays hot
  • That current keeps the gas valve open. If the flame goes out, the thermocouple cools, the current stops, and the valve closes automatically to prevent unburned gas from escaping
  • Many newer water heaters use electronic ignition or a flame sensor instead of a standing pilot, but the same principle applies: no flame detected means no gas flow

When a pilot won’t stay lit, one of these parts is usually failing, or something is disrupting the flame.

7 Common Causes of a Pilot Light That Keeps Going Out

1. A Worn or Faulty Thermocouple

This is the most common culprit. Thermocouples wear out over time, and a weak one can’t generate enough current to keep the gas valve open, even when the flame looks normal. If the pilot lights while you hold the control knob down but goes out as soon as you release it, a failing thermocouple is the likely cause.

2. A Dirty or Clogged Pilot Orifice

Dust, soot, and debris can partially block the tiny opening that feeds gas to the pilot. The flame becomes weak, small, or unstable, and it can’t keep the thermocouple hot enough. A healthy pilot flame should be steady and mostly blue.

3. Drafts or Poor Ventilation

A strong draft from a nearby door, window, or HVAC vent can blow the pilot out. Blocked or improper venting can also cause problems. If combustion gases can’t leave through the flue properly, the flame can be disturbed or snuffed out. Poor venting is also a carbon monoxide risk, which is why it should never be ignored.

4. A Faulty Gas Control Valve

The gas control valve regulates the flow of gas to both the pilot and the main burner. If it is failing, it may shut off gas unexpectedly or deliver an inconsistent supply. This is not a DIY repair.

5. Low Gas Pressure or Supply Issues

If the pilot is weak or goes out when other gas appliances run, the problem may be the gas supply to your home. A restriction in the gas line or a regulator issue can starve the pilot of fuel.

6. Sediment Buildup in the Tank

Years of mineral sediment can settle at the bottom of the tank. Excess buildup causes the burner to run longer and hotter, and it can contribute to overheating, which may trip the safety systems that shut the unit down.

7. An Aging Water Heater

Most gas water heaters last about 8 to 12 years. As the unit ages, components wear out together, and repeated pilot problems can be a sign the whole heater is nearing the end of its service life.

What You Can Safely Check Yourself

Some basic observations are reasonable for a homeowner and can help a plumber diagnose the problem faster. These are checks only, not repairs.

  • Look at the flame color. A steady blue flame is normal. A yellow, orange, or flickering flame suggests a combustion or venting issue and means you should stop and call a professional
  • Check for drafts near the water heater, such as open windows, a door that swings open, or a vent blowing directly toward the unit
  • Note the pattern. Does the pilot go out after a few minutes, a few hours, or only when something else in the house runs? That detail helps pinpoint the cause
  • Make sure the area around the heater is clear. Never store paint, gasoline, cleaning products, or other flammable items near a gas water heater

If you choose to relight the pilot, follow the exact instructions on the unit’s label and only if you smell no gas. If you smell gas at any point, do not attempt to relight it.

When to Stop and Call a Licensed Gas Plumber

Pilot light problems involve gas, so the line between a simple fix and a safety risk is thin. Call a professional right away if:

  • You smell gas, sulfur, or “rotten eggs” near the water heater. Leave the house immediately, avoid switches and flames, and call your gas utility or 911 from a safe distance
  • The pilot goes out repeatedly, even after you relight it correctly
  • The flame is yellow, orange, or looks lazy or uneven
  • You notice soot, scorch marks, or discoloration around the water heater or its vent
  • Your carbon monoxide detector sounds or you feel headaches, dizziness, or nausea at home
  • The water heater is more than 10 years old and has started acting up
  • You are unsure about any step of the relighting process

Gas work in Virginia must be performed by licensed professionals, and a repair done incorrectly can create fire, explosion, or carbon monoxide hazards.

Repair or Replace? How a Pro Decides

When our team inspects a water heater with a pilot problem, we start with the simplest, most cost-effective fix and work from there.

  • Thermocouple or pilot assembly replacement is often a quick, affordable repair on a heater that is otherwise in good shape
  • Cleaning and adjusting the pilot orifice and burner can restore a stable flame
  • Venting corrections address drafts, blockages, or improper flue conditions that are disrupting combustion
  • Gas control valve replacement may be worthwhile on a younger unit, but on an older heater the cost can push replacement into the smarter choice
  • Full replacement makes sense when the tank is old, sediment-heavy, leaking, or experiencing multiple failures at once

We give you an honest, side-by-side recommendation so you can choose the option that fits your home and budget.

Final Thoughts

A pilot light that won’t stay lit is your water heater telling you something is wrong. Often the fix is simple, like a worn thermocouple. But because gas and combustion are involved, it is not worth gambling on guesswork. A quick professional inspection protects your family, restores your hot water, and can extend the life of your water heater.

If your pilot keeps going out, the licensed team at Cordova’s Plumbing LLC is ready to diagnose the problem and get your hot water running safely again.


Dealing with a water heater that won’t stay lit in Richmond, VA? Contact Cordova’s Plumbing LLC today. We’re licensed, insured, bilingual, and available 24/7 for emergencies throughout Richmond and the surrounding 100-mile area.

📞 Call us at (804) 974-5484 or contact us online to schedule your service.

Share This :

When you choose us, you’re not just hiring a contractor. You’re gaining a trusted partner with over 10 years of experience, licensed and insured service, and a commitment to quality and customer satisfaction.

Info